Super Precision Vertical Turret Mills, SP-500VS

MACHINE FEATURES                                                  Validity: 60 days

l  10”x54”” Table, long saddle & box way on Y l  Hardened & Ground Table with Ground T-Slot l  3HP Spindle Motor, variable speed l  R8 (NST#30) Spindle Material Scm415(SAE4115)Hardened & Ground. l  Bearing support to the motor shaft l  Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support l  Turcite-B On X&Y Ways, Slideways and Gibs. l  Hardened & Ground X&Y Slideways. l  Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC. l  Leadscrew nut made from PBC2, phosphor bronze l  Highly Improved Vari-Speed Head. l  Rubber chip cover (front & rear ) l  1-1/2”(38mm) Diameter Lifting Screw. l  Leveling Screw & Plate On Base. l  Tool box & Tool l  Rubber chip cover ( front & rear )

Specification:

Table:                                                                              10” x 54” (250 x 1370mm)

T-Slot No.x Size:                                                                3” x 0.629” (3 x 16mm)

Longitudinal travel (W/O power feed ):                                 34” (870mm)

                          (With power feed ):                                  30.5” (775mm)

Cross travel:                                                                      16” (410mm)

Travel of knee:                                                                  17” (450mm)

Ram travel:                                                                       22” (562mm)

Quill travel:                                                                        5” (127mm)

Table to spindle nose (D):                                                   3.3” — 21” (85-535mm)

Over swivel on turret:                                                          360º

Head Swivel ( R & L ):                                                         +45º

Head tilt ( UP & DOWN ):                                                     45º

Spindle to column (F):                                                        6.6”-28.7” (168-730mm)

Spindle motor:                                                                   3HP

Spindle taper:                                                                    R8 (or NST#30 )

Quill feed:                                                                         0.0015” - 0.003” - 0.006”

Spindle Speed (r.p.m.):                                                      (60Hz) 60-4500, ( 50Hz ) 50-3800

Overall height (A):                                                              90” (2262mm)

Overall depth (B):                                                               83.5” (2120mm)

Overall width (C):                                                                72.4” (1840mm)

Net Weight:                                                                        3360 lbs. (1500 Kgs)