* 3HP 3PH spindle motor, Standard NST#40 spindle, 10 X 50” Table X Longitudinal axis (X-axis) Align SP-500X power feed installed.
* Spindle Material SCM415(SAE4115) Cr-Mo Alloy steel with tempering treatment, full Hardened & Ground, spindle run-out:0.0002”
* Centralized one-shot lubrication system for ways, nuts and lead screws of axes
* Precision angular contact spindle bearing
* Uniquely designed high-low gear speed, bearing support on both sides of spindle pulley
* Adjustable brake handle increases the life of the brake shoe
* Extra long spindle (650mm) support to the table provides high accuracy & rigid machining
* Turcite-B coated XY ways
* Square way on Y axis 16" travel
* Hardened & Ground Table
* Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
* Hardened & Ground X&Y Slide-ways.
* Leadscrew nut made from PBC2, phosphor bronze
* Highly Improved Variable-Speed Head.
* Rubber chip cover (front & rear )
* 1-1/2”(38mm) Diameter Lifting Screw.
* Powerful Lifting motor, electrical box and pendent (shown in picture).
* Coolant system, coolant tray, Auto lube system, Quartz work light, Power drawbar all included
* Safety guarding on spindle (acryline) and with safety switch interlocked with spindle operation
* Tool box & Tools
* Canadian CSA electricity approved
Newall DP700 2-axis DRO included.
Specification:
Table: 10” x 50” (254 x 1270mm)
T-Slot No.x Size: 3” x 0.629” (3 x 16mm)
Longitudinal travel (W/O power feed ): 30.5” (776mm)
(With power feed ): 27.5” (696mm)
Cross travel: 16” (406mm)
Travel of knee: 16” (406mm)
Ram travel: 22” (560mm)
Quill travel: 5” (127mm)
Table to spindle nose (D): 4”- 20” (100-506mm)
Over swivel on turret: 360º
Head Swivel ( R& L ): +/-45゜
Head tilt ( UP& DOWN ): +/-45゜
Spindle to column (F): 6.25”-28.3” (159-719mm)
Spindle motor: 3HP (variable speed)
Spindle taper: R8/NST#30 (NST#40 option)
Quill feed: 0.0015” - 0.003” - 0.006”
Spindle Speed (r.p.m.): ( 60Hz) 60-4500, (variable speed)
Overall height (A): 83.464” (2120mm)
Overall depth (B): 81 614 (2073mm)
Overall width (C): 66.2” (1680mm)
Net Weight: 2730 lbs. (1250 Kgs)
Welcome to visit atmiusa.com or manford-usa.com